Specification Sheet

Toilet wall-mounted Duravit Rimless for SensoWash® fToilet wall-mounted Duravit Rimless for SensoWash® f DimensionDimension WeightWeight Order numberOrder number
rimless, WaterSense® listed, washdown model, only in
combination with SensoWash f, cUPC® listed*
ColorsColors
VariantVariant
1.28/0.8 gpf 14 3/4" x 22 5/8" Inch 55.1 lb 251009..92
InfoboxInfobox
Choose suitable pre-installation kit or connecting set depending on in-wall carrier selection, Wall-mounted toilet is
ADA compliant, when installed with a seat height of 17" - 19" from the finished floor, If using DuraSystem in-wall
tank & carrier, # 005072 is mandatory for SensoWash® installation during rough-in stage, In-wall tank & carrier
and actuator plate required for installation, Not available with WonderGliss
Noise reduction gasket for wall-mounted toilet 0.7 lb 005064
Actuator plate A1, for toilet, plastic mechanical actuation, for
surface mounted installation, dual flush, mounting frame,
mounting hardware included, push rods, front plate plastic
8 1/2" x 5 3/4" Inch 0.7 lb WD5008
Toilet in-wall tank & carrier, Standard WaterSense® listed, For
2"x4" and 2"x6" wall installation, for toilets with a projection of
<= 24 5/8", adjustable feet 0" - 9 1/2", SensoWash ready,
mechanical front flush actuation, includes in-wall tank, marking
of filling height, dual flush, insulated against condensation,
Scope of delivery, HDPE wall-mounted toilet connection bend
DN 90/90, PE wall-mounted toilet connection set DN 90, wall-
mounted mounting rods M12, mounting hardware included, 2
bolt caps, cUPC® listed*, Load capacity = 880 lbs
23 1/4" x 45 1/4" Inch 35.3 lb WD1022
ME by Starck Toilet wall-mounted Duravit Rimless for
SensoWash® f Ÿ # 251009..92
|< 14 3/4" Inch >|