Specification Sheet

Toilet wall-mountedToilet wall-mounted DimensionDimension WeightWeight Order numberOrder number

washdown model, Durafix included, cUPC® listed*

ColorsColors

00 White 20 HygieneGlaze (an antibacterial ceramic glaze that

provides almost indefinite effectiveness)

VariantVariant

InfoboxInfobox

* Complies with following standards: ASME A112.19.2/CSA B45.1 and ASME A112.19.14, Durafix for concealed

fixation is included, In-wall tank & carrier and actuator plate required for installation / Refer to page XXX, Wall-

mounted toilet is ADA compliant, when installed with a seat height of 17" - 19" from the finished floor

Sanitary ceramics with the special WonderGliss surface finish will remain clean and attractive-looking for a long

time to come.

When ordering WonderGliss please add a "1" as eleventh digit to the model number.

Sigma 01 flush plate, dual flush for toilets, White 9 5/8" x 6 1/2" Inch 115770

Geberit carrier for toilets 19 3/4" x 3 1/8" Inch 37.5 lb 111798

Geberit in-wall tank and carrier for toilets, width 19 3/4", depth

5 1/2", height (adjustable) 43" - 47"

19 3/4" x 5 1/2" Inch 40.8 lb 111335

Noise reduction gasket for wall-mounted toilet 0.7 lb 005064

Suitable productsSuitable products

Toilet seat and cover removable, elongated, hinges stainless

steel, without slow close,

006051

DuraStyle Toilet wall-mounted Ÿ # 253709..92

|< 14 5/8" X 24 3/8" Inch >|

PAGE 1
|< 14 5/8" X 24 3/8" Inch >| DuraStyle Toilet wall-mounted Ÿ # 253709..92 Toilet wall-mounted Dimension Weight Order number 14 5/8" X 24 3/8" Inch 68 lb 253709..92 washdown model, Durafix included, cUPC® listed* Colors 00 White 20 HygieneGlaze (an antibacterial ceramic glaze that provides almost indefinite effectiveness) Variant © 1.6/0.8 gpf Infobox * Complies with following standards: ASME A112.19.2/CSA B45.1 and ASME A112.19.
PAGE 2
DuraStyle Toilet wall-mounted Ÿ # 253709..92 Toilet seat and cover removable, elongated, hinges stainless steel, with slow close, |< 14 5/8" X 24 3/8" Inch >| 006059 All drawings contain the necessary measurements which are subject to standard tolerances. They are stated in inch & mm and are nonbinding. Exact measurements, in particular for customized installation scenarios, can only be taken from the finished ceramic piece.