Safety Instructions

Do NOT use the product if it is not working properly.
> Disconnect from the power supply immediately. Close the stop
valve to interrupt the water supply. Contact [e-mail].
> Avoid malfunctions and damage to the product as a result of im-
proper use.
CAUTION
Health damage and potential product damage!
> Supply the Shower WC with cold drinking water from the main wa-
ter system.
> The new hose-sets supplied with the appliance are to be used and
old hose-sets should not be reused.
> The product itself does not have electrical leakage protection func-
tion, it must be installed in circuit where there is leakage protection
device installed.
> Means for disconnection must be incorporated in the fixed wiring in
accordance with the wiring rules and having a contact separation in
all poles that provide full disconnection under overvoltage category
III conditions.
> Check the rated power and choose cross cable accordingly.
> Do NOT sit, stand or lean on the lid.
> Do NOT connect any waste water, grey water, industrial water, sea
water or other untreated or semi-treated water.
> Do NOT detach seat and lid for any purpose.
> Do NOT damage the surface of seat. If the surface of the seat is
damage, contact [e-mail].
> DO NOT open and close seat with excessive force.
> Open and close the lid via remote control and app only. Do not open
and close the lid manually.
> If the SensoWash® is moved from a cold location to a warm loca-
tion, condensation may form. Leave the unit switched off for a few
hours.
> Do NOT install the SensoWash
®
in rooms where there is a danger
of frost. The room temperature must not be less than 4°C (39°F).
> Do NOT place open fire sources, candles, cigarettes, or similar, on
the SensoWash
®
.
> Do NOT expose the SensoWash® directly to water or sunlight.
> Do NOT climb on or stand on the product.
> Do NOT place any heavy objects on the lid.
> Do NOT deliberately soil, spray or block the spray wand.
8
EN