Installation & Assembly

13
EN
Activating / deactivating the energy saving mode
> Press the "Power" button
E
on the seat unit for less than 2 seconds.
SensoWash
®
enters the energy saving mode.
The
status display
D
turns green.
> Press the "Power" button
E
on the seat unit again for less than 2 seconds.The
SensoWash
®
returns to the normal mode.
The
status display
D
turns red.
When the energy saving mode is activated, the seat heating is deactivated for the
next 8 hours then can then be automatically reactivated for 16 hours. This procedure
is repeated at the same time every day until the energy saving mode is deactivated.
If all SensoWash
®
functions have been inactive for 48 hours, the auto saving mode will
activate automatically. The seat heating is now inactive. When any function is used, all
previous settings will automatically be reactivate.
To deactivate the seat heating permanently, press the "Temperature" button
10
on
the remote control.
Rearwash
> Press the "Rearwash" button
B
on the seat unit.
The spray wand extends and sprays a jet of water.
> Press the "Rearwash" button
B
on the seat unit again.
The oscillation function starts.
> Press the "Rearwash" button
B
on the seat unit again.
The spray wand retracts and the current function stops immediately.