Installation & Assembly

19 mm
8 Nm
6 ft-lbs.
1
2
> Slide the pull rod onto lift rod.
> Tighten the bolt with a flat head
screwdriver.
> From the underside of the sink thread the
drain body into the waste seat.
> Use plumbers putty to make up any gaps
between the ceramic and the drain.
> Clean the drain opening at the bottom of
sink.
> Place the waste seat in opening of the sink.
> Tighten all connections with the wrench
until secure. Maximum torque 6 ft-lbs.
# C11060 005U 10, # C11060 006U 10
8 MAL_57157/17.06.1
en
X
XX
X1413
1211