Installation Sheet

2x
2x
19
9 10 11 12
13 14 15 16
Using a screwdriver adjust the
vanity mounting hinge system
clockwise.
Screw two set-screws until
desired leveling of the vanity
has been reached.
Using the appropriate bit for
the wall material, drill pilot
holes.
The plastic anchors provided
are for concrete wall
applications.
For wood stud wall bolts should
be screwed into wood backing.
Install the vanity drawer. Remove plate with Duravit logo. Level the vanity drawer by
adjusting two screws.
MAL_Darling New_DN6472/15.04.1