Installation Sheet

2x S8
Ø ⅜”
110 V
Ø ⅜”
2x S8
2x 5,5x50
2x 5,5x50
Installation is completed. > Slide the unit completely
down.
> Slide the unit toward the
wall.
> Screw the bracket(s) to
the wall at the specified
location.
> For wood stud walls, bolts
should be screwed into
wood backing.
> The plastic anchors
provided are for concrete
wall applications.
> Use a 3/8“ drill bit.
> Drill the anchor holes that
have been marked.
NOTICE
A 110 V GFCI outlet is
required.
> Mark the holes to be
drilled for the anchors.
> Plug the unit into outlet
and lift the unit up
and onto the mounting
brackets.
> Screw the bracket(s) to
the wall at the specified
location.
> The plastic anchors
provided are for concrete
wall applications.
> Check the brackets are
leveled and securely
attached to the wall.
en
MAL_DuraStyle_DS7468/19.04.2 6
11109
4321
8765