Care Sheet

12 13
en
CARE AND CLEANING OF GLASS SURFACES
The non-porous surface of glass is hygienic
and easy to clean. Glass surfaces are best
cleaned with warm water and a little deter-
gent or with a household glass cleaner and a
soft lint-free cloth.
REPLACING FLUORESCENT LAMPS
Further information on how to replace your
lamp properly can be found on our website
www.duravit.com in the Downloads section of
your relevant product.
HAZARD INFORMATION
1. No persons are allowed to hang on the
doors, pull-outs and drawers.
2. Open the doors as far as they will go and
do not overextend them.
3. Keep stored medication and cleaning
agents away from children.
4. The assembly and disassembly of fur-
niture and furniture parts must only be
carried out by an authorised specialist.
5. Doors, pull-outs and drawers must be
held firmly underneath so that they do
now fall down.
6. Please note - as is the case with all
electrical equipment - furniture with in-
tegrated lamps should also not come into
contact with water.
7. Pull plugs out of the socket only with
counter-pressure.
8. Electrical parts should only ever be
cleaned when they have cooled down us-
ing a dry cloth.
9. Do not reach into the socket. (Caution:
electric shock!)
10. Allow fluorescent lamps to cool down
before they are replaced.
11. Do not apply too much pressure to lamps,
otherwise they may break into sharp
shards of glass.
12. All furniture parts with an electrical
installation must only be connected by a
qualified electrician taking (DIN 57 100)
VDE 0100, Part 701 into account.
13. LED light sources (service life > 30,000
hours) Lamps cannot be replaced.
14. Customer service hotline on
[phone].
SETTING THE HINGES
Version 1
Version 2
12
2
3
3
1