operation manual

30
EN
λϡKeep the power cord away from hot surfaces and sharp edges.
λϡDo NOT use the product if it is not working properly.
Disconnect from the power supply immediately. Close the stop
valve to interrupt the water supply. Contact [e-mail].
Avoid malfunctions and damage to the product as a result of
improper use.
CAUTION
Health damage and potential product damage!
> Supply the device with cold drinking water from the main water
system.
> Do NOT connect any waste water, grey water, industrial water,
sea water or other untreated or semi-treated water.
λϡIf the SensoWash
®
is moved from a cold location to a warm
location, condensation may form. Leave the unit switched off
for a few hours.
λϡDo NOT install the SensoWash
®
in rooms where there is a dan-
ger of frost. The room temperature must not be less than 4°C.
λϡDo NOT place open fire sources, candles, cigarettes, or similar,
on the SensoWash
®
.
λϡDo NOT expose the SensoWash
®
directly to water or sunlight.
λϡDo NOT climb on or stand on the product.
λϡDo NOT place any heavy objects on the lid.
λϡDo NOT deliberately soil, spray or block the spray wand.
Repairs must only be carried out by a person with the neces-
sary expertise.
λϡDo NOT carry out modifications, tamper with, install additional
equipment or attempt to repair the SensoWash
®
.
λϡRepairs must be carried out by qualified electricians or techni-
cians.
λϡImproperly performed repairs can lead to accidents, damage
and malfunctions.
λϡDo NOT use attachments not recommended by Duravit.