operation manual

45
EN
The water
spray intensity
is too weak.
The water spray
intensity has been
set to Low.
> Adjust the “Water
spray intensity”
2
and/or
3
to Medi-
um or High.
6.2
The water supply
hose has buckled.
> Contact your
installer.
The water tem-
perature is not
warm enough.
The water tempera-
ture has been set to
Off or Low.
> Adjust the “Water
temperature”
6
to
Medium or High.
6.2
The water
spray from the
spray wand
suddenly stops.
The function au-
tomatically stops
after 2 minutes.
This is normal.
A jet of water is
not emerging
from the spray
wand.
The spray nozzle is
clogged.
> Clean the spray
nozzle.
7. 2
Night light function
The night light
does not come
on.
The night light has
been set to Off
mode.
This is normal.
> Set the night light
to Auto or On mode.
6.3
The night light is
in Auto mode and
the ambient light is
bright.
This is normal.
Problem Potential cause Solution Ch.