operation manual

52
EN
A jet of water is not
emerging from the
spray wand.
The seat sensor is not in
contact with the user.
> Sit down and carry out the
option required.
The water supply hose has
buckled.
> Contact your installer to have
this checked.
The opening of the spray
wand is blocked/soiled.
> Use a small brush to clean
the opening of the spray
wand.
Heatable seat
The seat is not warm
enough.
The seat temperature has
been set to "Off" or "Low".
> Set the seat temperature
to "Medium" or "High" at
the remote control
(see chapter 6).
The seat temperature
is too high.
The seat temperature has
been set to "High".
> Set the seat temperature to
"Medium" or "Low" at the re-
mote control
(see chapter 6).
Problem Potential cause Solution