Operation Manual

Operation
Operating manual 171/173 Version 01.0 - 01/201638
5.8.3 Lifting the carrier roller
To sew corners or radii, the carrier roller (3) can be lifted a little
using the button (2).
Using the hand lever (1), the carrier roller (3) can be raised
co
mpletely out of the sewing area, e.g., if only the bottom
feed is to be used for sewing.
Fig. 22: Lifting the carrier roller
Lifting the carrier roller briefly:
1. Press the bottom-most button (2) on the keypad.
 The LED on the button (2) lights up. The roller is raised.
2. Press the bottom-most button (2) on the keypad again.
 The LED on the button (2) goes out. The roller is lowered.
Raising the carrier roller completely:
1. Pull the hand lever (1) to the front.
 The lever engages. The roller is completely raised.
2. Push the hand lever (1) to the back.
 The lever disengages. The roller is lowered.
①
②
(1) - Hand lever
(2) - Button for lifting the roller
(3) - Carrier roller
③