Instruction manual

6.11 Sewing backward (backtacking)

Backtacking with the lever

–

Push the stitch regulator lever (1) downwards. The machine sews

backward stitches as long as the stitch regulator lever (1) is being

pushed.

Automatic backtacking (bartacking)

–

In the machines equipped with the positioning motor it is possible

to pre-select the backtacking by a pre-selected backstitches

number both at the beginning and at the seam end. At the seam

beginning (after the preceding thread trimming) after the pedal

treading forwards the machine sews the pre-selected bartack

entirely automatically. The same at the seam end after the pedal

treading in the position –2 the machine sews the pre-selected end

bartack and then trims the threads (see chapter 8).

6.12 Setting the stitch length

–

Turn the button (1) so that the number (2) indicating the required

stitch length in mm corresponds to the mark (3).