Instruction manual

4.2 Fitting the belt guards

–

Disassembly the hand wheel (1).

–

In the machines with the motor on the sewing head and with 1,55:1

toothed belt driving gear, mount the proximity switch (3). It is

included in the “kit for motor“.

–

In all machines with the motor on the machine head mount the

guard (2) (it is included in of the motor part set).

–

Mount the hand wheel (1). Doing this, observe the correct angle

position: if the needle is in the upper dead point, there s hould be

the 0° value on the hand wheel scale.