Instruction manual

5.3 Connection of the head to Efka DC1550/DA321G drive

Efka DC1550/DA321G direct drive is fixed directly on the machine

head. The motor synchronizer is incorporated in the motor body and it

is not located on the hand wheel (this applies, however, only for the 1:1

gear reduction motor – machine).

–

Connect the machine head connecting cable to the connector (1).

–

Connect the control panel to the connector (2).

–

Connect c onnector (3) of the motor synchronizer (6) to

connector (4).

–

Connect the connector (5) of the motor (6) to the connector (7).

–

Connect the pedal position s ensor (8) to the connector (9).

–

Connect hand wheel position in connector B18.

741 2 935 6 8

B 7 7 6

V 8 . .

B 1 8

L S M . . .

B 2

B 8 0

E B . . .

B 4 1