Operating instructions

Setup
Operating Manual 512/532 Version 00.0 - 12/201378
8.3.8 Electrical connection
8.3.9 Checking the mains voltage
The voltage specified on the controller type plate must agree with
the mains voltage used.
8.3.10 Connecting the cables to the controller
Figure 26: Connecting the cables to the controller
1. Connect the cables.
All cables are labelled appropriately.
2. Lay the cables to the control cabinet and bundle together with
cable ties.
3. Connect the cable plugs.
4. Screw the equipotential bonding cables on the control cabinet
to the positions marked with earthing symbols.
DANGER
Risk of injury from electricity.
Unprotected contact with electricity can result in
serious injuries or death.
Work on the electrical system must ONLY be
performed by qualified electricians or appropriately
trained and authorized personnel.
ALWAYS unplug the power plug before working on
the electrical equipment. Measures for avoiding the
risk