Operation Manual

Operation
Operating Manual 512/532 Version 01.0 - 07/2015 31
7. Tighten the knurled screw (3).
8. Remove the button.
9. Adjust the button mount so that the button is securely held, by
loosening the knurled nut (3) and lightly adjusting the lever (2).
4.9 Shank shaper (optional)
Figure 10: Shank shaper
The button clamp can be optionally equipped with a shank
shaper (3).
Pivoting the shank shaper in/out
1. Manually swing the pivoting lever (2) with shank shaper (3) in
and out, with the button clamp raised.
Setting the shank length
1. Turn the adjusting screw (1):
• Clockwise = Shank becomes longer.
• Counterclockwise = Shank becomes shorter.
②
(1) – Adjustment screw
(2) – Pivot lever
(3) – Shank shaper
(4) – Screw
④
③
①