Operation Manual

Settings via the software
Operating Manual 512/532 Version 01.0 - 07/2015 41
5.10Sewing
Prerequisite:
• Machine is in sewing mode, Ready button LED illuminates.
• Needle is fitted.
• Needle thread is threaded.
• Seam appearance is selected.
1. Insert the material to be sewn.
2. Press the foot pedal forwards to the first position.
 The clamp lowers.
The clamp raises when the pedal is released.
3. Briefly press the foot pedal fully forwards.
 Sewing process starts. The clamp raises automatically at the
end of sewing.
5.11 Counter
The counter can be used as an item counter (parameter number
U020) or as a counter with an automatic stop (parameter number
U076).
Prerequisite:
• Machine is in programming mode, Ready button LED is off.
1. Press the Select button until the Counter symbol LED
illuminates.
2. Press the Reset button to set the counter to 0.
3. Press the +/– Function buttons to select the cycle number.
Each end of sewing decrements the counter by 1.
A message is shown in the display when the cycle number is
reached.
4. Insert a new bobbin.
5. Press the Reset button.
 Counter is reset.