Operation Manual

Settings via the software
Operating Manual 512/532 Version 01.0 - 07/201544
9. Press the Memory button to exit the memory mode.
10. Check the seam appearance ( 5.7 Checking the seam
appearance, p. 39).
5.14.2 Sewing with the memory buttons
1. Press the desired seam appearance memory button (or button
combination).
2. Press the Ready button.
3. Check the seam appearance form.
4. Sew with the selected seam appearance.
5.14.3 Deleting the memory button assignments
Prerequisite:
• Machine is in programming mode, Ready button LED is off.
1. Press the Memory button and button P2 at the same time.
2. Press the +/– Program buttons to select a memory location.
3. Press the Ready button to confirm the memory location.
4. Press the Reset button to delete the memory assignment.
5. Press the Ready button to confirm the deletion.
6. Press the Memory button to exit the memory mode.
5.15Saving seam appearance sequences
In addition to the seam appearances stored in memory locations
P1 ~ P50, the sewing machine also allows the use of seam
appearances stored in memory locations C01 ~ C25.
Prerequisite:
• Machine is in programming mode, Ready button LED is off.
1. Press the Memory button and button P3 at the same time.
2. Press the +/– Program buttons to select a memory location
(C01 ~ C25).
3. Press the Ready button to save the seam appearance sequence.
4. Press the +/– Function buttons to sew the 1
st
seam
appearance.
5. Press the +/– Function buttons to sew the 2nd seam