Operation Manual

Settings via the software
Operating Manual 512/532 Version 01.0 - 07/2015 45
appearance.
6. Press the +/– Function buttons to sew the 3rd seam
appearance.
7. Press the +/– Function buttons to sew the 4th seam
appearance.
8. Press the Ready button to confirm the seam appearance
sequence.
 The Program shows the memory location, the Function
display shows the number of seam appearances.
9. Press the Memory button to exit the memory mode.
5.16Sewing with a seam appearance sequence
Prerequisite:
• Machine is in programming mode, Ready button LED is off.
1. Press the +/– Function buttons to select a seam appearance.
2. Press the Ready button to confirm the seam appearance
sequence.
 The Program display shows the seam appearance
sequence, e. g. <1.1>,
The Function display shows the seam appearance number.
3. Briefly press the pedal fully forwards.
 The seam appearance is sewn. At the end of sewing, the
Program display shows the next seam appearance
sequence, e. g. <1.2>, the Function display shows the next
seam appearance number etc.
4. To switch between seam appearances in a sequence, press
the +/– Program buttons and select the desired seam
appearance.
5.17Deleting a seam appearance sequence
Prerequisite:
• Machine is in programming mode, Ready button LED is off.
1. Press the Memory button and button P3 at the same time.
2. Press the +/– Program buttons to select a seam appearance