Operation Manual

Settings via the software
Operating Manual 512/532 Version 01.0 - 07/201546
sequence (C01 ~ C25).
3. Press the Ready button to confirm the seam appearance
sequence.
4. Press the Reset button to delete the seam appearance
sequence.
5. Press the Ready button to confirm the deletion.
6. Press the Memory button to exit the memory mode.
5.18Finishing sewing
1. Press the Ready button.
 The button LED illuminates. The controller is in the sewing
mode.
2. Main power switch OFF.
Note
If the sewing machine is switched off without pressing the Ready
button then any changed values are not saved.
5.19Editing parameters in memory
5.19.1 Editing parameters at the M1 level
Prerequisite:
• Machine is in programming mode, Ready button LED is off.
1. Press and hold the Memory button for 3 s.
 The controller beeps once, the button LED lights up.
The Program display shows the parameter number, the
CAUTION
Risk of injury from needle and moving parts
Do not reach under the raised clamp.