Operation Manual

Settings via the software

Operating Manual 512/532 Version 01.0 - 07/201552

Saving a seam appearance from the controller to the USB

stick: Value 2

1. Use the +/– Function buttons to set a value of 2.

2. Press the Select button to save the seam appearance to the

USB stick (HSW2001.scv = U01 ~ HSW2010.scv = U10).

3. Press the Select button to confirm the save operation.

 The Function display shows the value ok,the controller

beeps and the seam appearance is now saved.

4. Press the Reset button twice.

Deleting a seam appearance from the controller: Value 3

1. Use the +/– Function buttons to set a value of 3.

2. Press the Select button.

3. Press the Reset button to confirm the deletion.

 Function display shows “----”.

Editing a seam appearance / contour test: Value 4

Figure 14: Editing a seam appearance

1. Use the +/– Function buttons to set a value of 4.

2. Press the Select button.

 The Program display shows 1 for the first stitch, the

Function display shows the value for the X axis, the X axis

symbol LED illuminates.

3. Use the +/– Function buttons to set the coordinates of the

stitch for the X axis.

4. Press the Select button.

 The Y axis symbol LED illuminates, the Function display

shows the value for the Y axis.