Operation Manual

Settings via the software
Operating Manual 512/532 Version 01.0 - 07/201556
5.24Loading software from a USB stick
When a new software version is available, this can be downloaded
from www.duerkopp-adler.com and loaded into the controller via
a USB stick.
Important
The following files must be stored on the USB stick:
• FUYSTS.BT
• LEEYSTS.BT1
•BT1mot
•BT1PAT
E 9 1 2 Internal error – • Notify DA Service
E 9 1 3 Thread catcher
search error
Thread catcher sensor not
responding
• Main power switch OFF.
• Check the sensor.
E 9 1 4 Thread catcher
motor error
Thread catcher motor not
running correctly
• Main power switch OFF.
• Check the motor and
connections.
Error message Description Possible cause Remedy
ATTENTION
Interrupting the copy process can damage the machine.
Never pull out the USB during the copy process.
Only pull out the USB after the specified copying time.