Service manual

Work principles
Service manual 512/532 Version 00.0 - 12/2013 9
3 Work principles
3.1 Order of settings
Observe order Always adhere to the specified sequence for the individual setting steps.
Always observe all notes marked with a in the margin on prerequisites
and follow-up settings.
3.2 Cable routing
Binding the cable
together
Ensure that all cables in the machine are laid in such a way that moving
parts are not impaired in their ability to function correctly.
1. Lay excessively long cables neatly in proper cable snakes.
2. Tie the snakes together using a cable tie.
If possible, bind the snakes to fixed parts.
The cables must be fixed firmly in place.
3. Cut off any protruding part of the cable tie.
ATTENTION
Machine damage possible due to incorrect order.
Always adhere to the working order specified in this manual.
ATTENTION
Machine damage and malfunctions can be caused by laying the
cables incorrectly.
Excess cabling may obstruct moving machine parts in their ability to
function correctly. This will affect the sewing function and may cause
damage.
Lay excess cabling as described above.