Service manual

Work principles
10 Service manual 512/532 Version 00.0 - 12/2013
3.3 Removing the covers
In many types of setting work, you will have to remove the machine covers
first in order to access the components.
Described here is how to remove the individual covers and how to reattach
them. Just the cover that needs to be removed is then specified in the text
for that particular type of setting work.
3.3.1 Access to the machine bottom section
In order to access the components at the machine bottom section, you
must first tilt the machine upper section to the left.
Figure 1: Tilting the machine upper section to the left and setting it upright
Tilting the machine upper section to the left
 Tilt the machine upper section (1) to the left as far as possible.
Setting the machine upper section upright
 Set the upper machine section (1) upright.
WARNING
Risk of injury!
Crushing injuries from moving parts.
Switch the sewing machine off before you remove
the covers or refit them.
(1) - Machine upper section
①