Service manual

Settings via software
42 Service manual 512/532 Version 00.0 - 12/2013
11.16Processing sewing pattern sequences
Prerequisite:
• The machine is in the programming mode, the LED in the Ready button
is off.
1. Press the +/- Function buttons to select a sewing pattern sequence.
2. Press the Ready button to confirm the sewing pattern sequence.
 The Program display shows the sewing pattern sequence, e.g. <1.1>;
The Function display shows the sewing pattern number.
3. Briefly press the pedal completely forwards.
 The sewing pattern is sewn. After completing sewing, the Program
display shows the further sewing pattern sequence, e.g. <1.2>; the
Function display shows the next sewing pattern number, etc.
4. To change between sewing patterns in a sequence, press
the +/- Program buttons and select the sewing pattern.
11.17Deleting sewing pattern sequences
Prerequisite:
• The machine is in the programming mode, the LED in the Ready button
is off.
1. Press the Memory and P3 buttons simultaneously.
2. Press the +/- Program buttons to select a sewing pattern sequence
(C01 ~ C25).
3. Press the Ready button to confirm the sewing pattern sequence.
4. Press the Reset button to delete the sewing pattern sequence.
5. Press the Ready button to confirm the deletion.
6. Press the Memory button to quit the memory mode.