Service manual

Settings via software
50 Service manual 512/532 Version 00.0 - 12/2013
E 5 1 0 File error own
sewing patterns
U01 ~ U10 read error Check file type.
Save data to USB again.
E 5 1 1 USB write error File with the same name
already exists
Delete or rename file.
E 5 1 2 USB read error Data cannot be loaded
from USB stick
Check USB stick.
Reinsert USB stick.
E 5 1 3 USB write error Data cannot be copied to
USB stick.
Check USB stick.
Reinsert USB stick.
E 5 5 0 Data write error Flash memory transfer
error
Set main switch to OFF.
Repeat process.
Replace the mainboard.
E 5 5 1 Internal process
error
Software error Set main switch to OFF.
Repeat process.
Replace the mainboard.
Update software.
E7
7
0
3
7
5
Motor signal
error
Encoder / motor has no
signal
Check motor / encoder.
E 7 3 6 Motor rotation
error
Motor stops after some
time / encoder has no
signal
Check motor / encoder.
E 7 3 7 Error Z phase Z signal no longer changes Check motor / encoder.
E 7 3 8 Error Z phase Z signal inaccurate /
encoder has no signal
Check motor / encoder.
E 9 0 7 Error search X-
axis
X-axis sensor does not
respond
Set main switch to OFF.
Check sensor.
E 9 0 8 Error search Y-
axis
Y-axis sensor does not
respond
Set main switch to OFF.
Check sensor.
E 9 1 0 Error clamp foot
search
Clamp foot sensor does not
respond
Set main switch to OFF.
Check sensor.
E 9 1 1 Error clamp foot
motor
Clamp foot motor does not
operate correctly
Set main switch to OFF.
Check motor and
connection.
E 9 1 2 Internal error - Notify DA Service
E 9 1 3 Error thread
catcher search
Thread catcher sensor
does not respond
Set main switch to OFF.
Check sensor.
E 9 1 4 Error thread
catcher motor
Thread catcher motor does
not operate correctly
Set main switch to OFF.
Check motor and
connection.
Error Description Possible cause Remedy