Service manual

Service settings via software
54 Service manual 512/532 Version 00.0 - 12/2013
12.2 Accessing the technician level
All of the settings in the service area are performed at the technician level.
12.2.1 Editing parameters in level 1
Prerequisite:
• The machine is in the programming mode, the LED in the Ready button
is off.
1. Press and hold the Memory button for 3 seconds.
 The controller beeps 1x; the LED in the button illuminates.
The Program display shows the parameter numbers; the Function
display shows the parameter values.
2. Press the +/- Program buttons to select other parameters.
3. Press the Ready button to confirm the parameter.
 The LED in the button illuminates.
4. Press the +/- Function buttons to change values.
5. Press the Reset button to reset a changed value.
6. Press the Ready button to save a change.
 The LED in the button switches off.
7. Press the Memory button.
 The LED in the button switches off.
12.2.2 Editing parameters in level 2
Prerequisite:
• The machine is in the programming mode, the LED in the Ready button
is off.
1. Press and hold the Memory button for 6 seconds.
 The controller beeps 2x; the LED in the button illuminates.
The Program display shows the parameter numbers; the Function
display shows the values.
2. Press the +/- Program buttons to select other parameters.
3. Press the Ready button to confirm the parameter.
 The LED in the button illuminates.
4. Press the +/- Function buttons to change values.
5. Press the Reset button to reset a changed value.
6. Press the Ready button to save a change.
 The LED in the button switches off.
7. Press the Memory button.
 The LED in the button switches off.