Service manual

About this service manual
4 Service manual 512/532 Version 00.0 - 12/2013
Information
Additional information, e.g. on alternative operating possibilities.
Observe order
Specifies the work to be performed before or after a setting.
References
 Reference to another section in the manual.
Safety Important warnings for the machine operator are specially designated.
Since safety is of particular importance, hazard symbols, levels of danger
and their signal words are described separately in  3 Safety information.
Orientation If the figure is unclear, indications of "right" and "left" are always from the
operator's point of view.
1.3 Other documents
This equipment includes components from other manufacturers. Each
manufacturer has performed a hazard assessment for these purchased
parts and confirmed their design compliance with applicable European
and national regulations. The proper use of these components is
described in each manufacturer's manual.
1.4 Liability
All information in this operating manual was compiled with consideration
to the state of the art, and applicable standards and regulations.
The manufacturer cannot be held liable for damages resulting from:
• Breakage and transport damages
• Failure to observe operating manual
• Improper use
• Unauthorized modifications to the machine
• Use of untrained personnel
• Use of unapproved replacement parts