Service manual

Maintenance work
Service manual 512/532 Version 00.0 - 12/2013 61
13.2 Adjusting the lubrication for the hook
Figure 36: Adjusting the lubrication for the hook
Adjusting steps
1. Loosen and remove the screw (1).
 The lubricating screw is located underneath the screw. The lubricating
screw presses against the oil wick of the hook lubricator.
2. Adjusting the lubricating screw:
• Loosening the screw: Increases lubrication for the hook
• Tightening the screw: Reduces lubrication for the hook
3. Insert and tighten the screw (1).
(1) - Screw
①