Service manual

Maintenance work
62 Service manual 512/532 Version 00.0 - 12/2013
13.3 Cleaning work
Lint and thread remnants should be removed after every eight hours of
operation using a compressed-air pistol or a brush.
Points that need to be cleaned particularly thoroughly:
• Hook
• Throat plate
• Handwheel filter
This cleaning work is described in the operating manual ( Operating
manual, Section 6 Maintenance).
ATTENTION
Damage to the paintwork due to solvent-based cleaners.
Solvent-based cleaners will damage paintwork on the machine.
Only use solvent-free substances when cleaning the machine.