Operation Manual

3. Maintenance

Caution Risk of Injury !

Pull the mains plug.

Maintain the machine only when it is turned off.

3.1 Cleaning

A clean machine protects against malfunctions !

Daily cleaning:

Clean the area under the clamp plates, particularly around the hook bracket 1, of

sewing dust, thread rests and cutting refuse.

ATTENTION !

It is to be avoided that cutting refuse enters into the

housing of the main disc cam at the back. If a vacuum is

available this is recommended.

–

Take off the clamp plates (see Chapter 2.1) and remove cutting waste.

–

Tilt up the machine head and remove cutting waste from the base.