Operation Manual

3.4 Threading the upper thread

Caution: Danger of injury !

The needle thread must only be threaded in when the machine is

switched off or in the “Threading mode” (see chapter “Threading mode”).

–

Thread in the needle thread as shown in the illustrations.

–

In order to thread in the needle thread push the threading wire

(part of the accessories) through the hollow needle bar 1 from the

bottom to the top.

–

Bring the needle thread behind the looper.

–

Pull the wire with the needle thread down.

–

Bring the needle thread to the left behind the tension disc 2 and

thread it into the needle from rear to front.