Operation Manual

13 Maintenance

Caution: Danger of injury !

Carry out maintenance work only when the machine is switched off.

Whenever maintenance work has to be done with the machine running

practice utmost caution.

13.1 Cleaning

A clean sewing automat helps to avoid disturbances !

Daily cleaning:

–

Clean the zone around looper, thread trimmer and throat plate as

well as the sewing head daily from sewing dust, thread tails and

cutting waste.

If a vacuum unit is available, it is best to evacuate the waste by

using it.

–

Empty the vacuum waste container, if neccessary.

–

Check the water level in the pressure regulator daily.

The water level must not rise up to the filter insert 2.

Screw in the drain screw 3 and the let the water run under

pressure out of the water separator 1.