Operation Manual

9.3 Connecting the pedal

–

Place the pedal 1 under the stand.

–

Remove the handwheel and the belt protection of the automat.

–

Guide the cable of pedal 1 through the cable duct of the automat

to the top. Fix the cable to the underside of the table top using

the provided cable clip.

–

Connect the cable of pedal 1 with bush 2 (X406).

–

Put the belt protection and the handwheel back again.

9.4 Securing the stand

–

Screw the two support plates down with nut 1 until the automat

stands firmly and safely.

–

Screw the counternut 2 upwards and tighten it.