Operation Manual

Sewing process Operation/explanation
At start of seam
Sew starting lock-stitch and
continue
Sew only starting lock-stitch
Do not sew starting lock-stitch
- Push pedal forwards and hold it there.
The starting lock-stitch is sewn.
Sewing then continues at the speed of rotation
determined by the pedal.
- Push pedal forwards briefly.
The machine halts in the 1st position after the
starting lock-stitch.
- Press key 3, then push pedal forwards.
The machine begins sewing at the speed of
rotation determined by the pedal.
In mid-seam
Interrupt the sewing process
Sew a corner
Resume the sewing process
(after releasing the pedal)
Sew an intermediate l ock-stitch
- Release pedal (rest position).
The machine halts in the 1st position.
The s ewing feet are down.
- Pull pedal half-way back.
The machine halts in the 1st position.
The s ewing feet are up.
- Rotate the material about the needle.
- Push pedal forwards.
The machine sews at the s peed of rotation set by
the pedal (no starting lock-stitch is sewn).
- Press key 1 and continue to hold the pedal
forwards.
The machine sews backwards for as long as
key 1 is held down.
The s peed of rotation is determined by the pedal.
Continued on next page !
27
GB
123(4)
1234