Operation Manual

9.2 Lubrication

(until July 2003) (from A ugust 2003)

Check the oil level at the sight glass 2 every week.

Top up the oil reservoir only with DA-10 oil or an equivalent oil with

the following specification:

–

Viscosity at 40° C : 10 mm

–

Ignition point: 150 °C

DA-10 can be obtained from DÜRKOPP ADLER AG sales outlets. The part numbers

are:

250 ml - Container: 9047 000011

1 litre - Container: 9047 000012

2 litre - Container: 9047 000013

5 litre - Container: 9047 000014

–

Remove oil-filling screw 1 and pour in oil.

–

Check oil level at sight glass 2.

The oil level must be between “EMPTY” and “FULL”.

–

Replace oil-filling screw 1.

Clean up any oil overflow.