Operation Manual

6.13 Locking the sewing feet in lifted position
–
Push the lever 1 downwards.
The sewing feet are locked in lifted position.
–
Push the lever 1 upward.
The sewing feet’s position is unlocked.
Or
–
Lift the sewing feet pneumatically by pushing the knee switch.
The lever 1 then moves back into its initial position.
6.14 Sewing-foot pressure
The required sewing-foot pressure is set with the setting wheel 2.
CAUTION !
The material must not ”swim”.
Do not set a higher pressure than is necessary.
–
To increase the sewing-foot pressure = turn the setting wheel 2
clockwise.
–
To decrease the sewing-foot pressure = turn the setting wheel 2
anti-clockwise.
27
1
12