Instructions / Assembly

Instructions - Assembly Duroflex 3D

Steps to install Duroflex 3D in chimneys:

1. Ensure application area is clean and dry.

2. Place Duroflex 3D into position and form it to basic shape of roof.



3. Remove the protective film and firmly fix top butyl adhesive into

place.

PAGE 1
Instructions - Assembly Duroflex 3D Steps to install Duroflex 3D in chimneys: 1. Ensure application area is clean and dry. 2. Place Duroflex 3D into position and form it to basic shape of roof. 3. Remove the protective film and firmly fix top butyl adhesive into place.
PAGE 2
4. Repeat operation in both sides of the chimney. 5. Mold to the chimney using a rubber hammer.
PAGE 3
6. Place tiles over Duroflex 3D to create a watertight seal against the roof. 7. Mold to the chimney using a rubber hammer.
PAGE 4
PAGE 5
8. Screw the aluminum profiles and seal.