SDS

SUREHOLD
®
Super Glue
Revision 3
Revision Date 21-July-2017
Page 2 of 7
Print date7/24/2017
3. COMPOSITION / INFORMATION ON INGREDIENTS
General chemical description:
Cyanoacrylate Adhesive
Base substances of preparation:
Cyanoacrylate
Chemical Name
CAS-No
EINECS Number
Index Number
REACH-Reg No.
Weight - %
Ethyl-2-cyanoacrylate
7085-85-0
230-391-5
607-236-00-9
01-2119527766-29-0002
>90-<100% *
Thickener
Proprietary
>1- <10%
* The exact percentage (concentration) of composition has been withheld as a trade secret
4. FIRST AID MEASURES
Description of first aid measures
General advice
Avoid breathing gas/fumes/vapor/spray.
Inhalation:
IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for
breathing. If symptoms persist, call a physician.
Skin contact:
IF ON SKIN: Wash with soap and water. Allow warm water to penetrate the bond and
gently attempt to remove bonded areas without pulling the skin away from bonded area.
If skin irritation persists, call a physician.
Eye contact:
IF IN EYES: Rinse immediately with plenty of water for several minutes. Remove
contact lenses, if present and easy to do so. Continue rinsing. Get medical
advice/attention.
Ingestion:
Not an expected route of exposure.
Ensure that breathing passages are not obstructed. The product will polymerize
immediately in the mouth making it almost impossible to swallow. Saliva will slowly
separate the solidified product from the mouth.
Self-protection of the
first aider:
Use personal protective equipment as required.
Most important symptoms and effect, both acute and delayed
May cause allergic or asthma symptoms or breathing difficulties if inhaled.
Eye:
Irritation, conjunctivitis.
Skin:
Redness, inflammation.
Respiratory
Irritation, coughing, shortness of breath, chest tightness.
Indication of any immediate medical attention and special treatment needed
In the case of lung irritation: Primary treatment using corticoide spray, e.g. Auxiloson spray, Pulmicort-dosage-
spray. (Auxiloson and Pulmicort are registered trademarks.)
5. FIRE FIGHTING MEASURES
Extinguishing media
Suitable extinguishing media:
Alcohol-resistant foam, dry powder, carbon dioxide, water spray jet
Unsuitable extinguishing media:
High volume water jet.
Special hazards arising from the substance or mixture
In the event of fire, the following can be released: Nitrogen oxides (NOx), carbon monoxide (CO), carbon
dioxide (CO
2
).
Advice for firefighters
In case of fire and/or exposure do not breathe fumes. Firefighters should wear positive pressure self-
contained breathing apparatus (SCBA). Firefighting operations, rescue and cleaning work under effect of
combustion and smolder gases may be done with breathing apparatus. Dispose of contaminated extinction
water according to official regulations.