MSDS

®
– Material Safety Data Sheet –
Lead Acid Battery Wet, Filled with Acid
SECTION I
Manufacturer’s Name: Date: March 15, 2002
East Penn Manufacturing Co., Inc.
Deka Road, Lyon Station, PA 19536 Trade Name: Electric Storage battery, SLI or Industrial battery
Telephone Number for Information: (610) 682-6361 Classification: Battery wet, filled with acid, electric storage
Emergency Telephone Number: CHEMTREC: 1-800-424-9300, UN2794
In Washington D.C. or outside continental U.S., call 1-202-483-7616
SECTION II
HAZARDOUS INGREDIENTS/IDENTITY INFORMATION
Hazardous Components
Specific Chemical Identity
(Common Name (s))
OSHA PEL
ACGIH TLV
Range
Percent
By Weight
Average
Lead, CAS #7439921 0.05 mg/m
3
0.05 mg/m
3
43-70 65
Sulfuric Acid, CAS #7664939 1.00 mg/m
3
1.00 mg/m
3
20-44 25
Antimony, CAS #7440360 0.50 mg/m
3
0.50 mg/m
3
0-4 <1
Arsenic, CAS #7440382 0.01 mg/m
3
0.01 mg/m
3
<.01 -
Polypropylene, CAS #9003070 - - 5-10 8
Calcium, CAS #7440702 1.0 mg/m
3
1.0 mg/m
3
<1 <1
SECTION III
PHYSICAL/CHEMICAL CHARACTERISTICS
Electrolyte (Sulfuric Acid):
Appearance and Odor: Clear, Odorless, Colorless Solubility in Water: Completely
Boiling Point: approximately 235
o
F Specific Gravity (H
2
0=1): 1.220 – 1.325
Evaporation Rate (Butyl Acetate=1): less than 1.0 Vapor Density (AIR=1): N/A
Melting Point: N/A Vapor Pressure (mm Hg): 13
SECTION IV
FIRE AND EXPLOSION HAZARD DATA
Flash Point (Method Used): Non-Flammable Flammable Limits: *Hydrogen Gas
Extinguishing Media: Class ABC extinguisher, CO
2
LEL: 4% UEL 74%
Special Fire Fighting Procedures: Cool exterior of battery if exposed to fire to prevent rupture. The acid mist and vapors in a fire
situation are corrosive. Wear special respiratory protection (SCBA) and clothing.
Unusual Fire and Explosion Hazards: *Hydrogen gas, which may explode if ignited, is produced by this battery, especially when
charging. Use adequate ventilation; avoid open flames, sparks, or other sources of ignition.
SECTION V
REACTIVITY DATA
Stability: Stable Condition to Avoid: Prolonged overcharging, sources of ignition
Incompatibility (Materials to Avoid): Sulfuric Acid
: Contact with combustibles and organic materials may cause fire and
explosion. Also reacts violently with strong reducing agents, metals, strong oxidizers and water. Contact with metals may produce
toxic sulfur dioxide fumes and may release flammable hydrogen gas.
Hazardous Decomposition of By-Products: Sulfuric Acid
: Excessive overcharging or fire may create Sulfur trioxide, carbon
monoxide, sulfuric acid mist, sulfur dioxide, and hydrogen.
Lead Compounds:
Contact with strong acid or base or presence of nascent hydrogen may generate highly toxic arsine gas.

Summary of content (4 pages)