Operating Guide

STARTING THE GENERATOR (CONTINUED)

Starting the Generator Using Propane

WARNING: WHEN USING THE GENERATOR WITH LPG, MAKE SURE THERE IS NO

POSSIBLE IGNITION SOURCE CLOSE TO THE GENERATOR.

1. Before using, make sure all of the LPG connectors and hoses are well connected and

sealed.

2. Connect electrical devices to generator ONLY after the engine runs smoothly.

(There may be remnant gasoline in the carburetor; this can cause unsteady engine

performance for several minutes)

3. If the propane gas leaks, shut o the LPG supply rst and then quickly unplug or turn

o any electrical devices powered by the unit.

4. When stopping the engine, unplug or turn o any electrical devices, turn o the Main

Circuit Breaker and then turn o the LPG Supply. After the engine has stopped turn

the KEY to ‘OFF” position.