Product Manual

6. Checking and filling the pump with cooling water

The pump must be filled with water before it is put to operation.

CAUTION:

gDo not attempt running the pump without cooling water or the

pump will get overheated. Extensive running without cooling water

may also damage the air tightness of the pump. If the pump is found

running dry, stop the engine and pouring in water when it cools

down.

. Starting engine

1. Turn on the fuel tap (by setting it to the ON position).

2. Close the choke.

NOTE:

gThe choke is not required when starting the engine warm or the

ambient temperature is rather high, (i.e. keep the choke open when

starting the engine).