Replacement Part List

ASS

Wheel Kit Installation

1 Install the axle assembly on the generator.

2 Install the two wheels on the axle shaft using the flange nuts.

3 Install the two stands on the under frame using the flange nuts.

Starter Cables Connection

1. Route the starter cable under the tank.

2. Connect the starter cable to the battery positive ( + ) terminal first, then to the negative ( - )

terminal. When disconnecting, disconnect at the battery negative ( - ) terminal first.

Battery posts, terminals and related accessories contain lead and lead compounds. Wash hands after

handling.

Engine Oil

PRE-OPERATION CHECK

Engine oil is a major factor affecting engine performance and

service life. Non-detergent and 2-stroke engine oils will damage

the engine and are not recommended.

• Check the oil level BEFORE EACH USE with the

generator on a level surface and the engine stopped.

• Use 4-stroke motor oil that meets or exceeds the

requirements for API service classification SJ.

Always check the API SERVICE label on the oil container to be sure it includes the letter SJ or better.