Replacement Part List

11
• SAE 10W-30 is recommended for general, all-temperature use. Other viscosities shown in
the chart may be used when the average temperature in your area is within the indicated range.
1. Remove the oil filler cap and wipe the dipstick clean.
2. Check the oil level by inserting the dipstick into the filler neck without screwing it in.
3. If the level is low, fill to the top of the oil filler neck with the recommended oil.
Fuel
• Check the fuel gauge, and refill the tank if the fuel level is low.
•
Refuel carefully to avoid spilling fuel. Do not fill above the shoulder of the fuel strainer.
Gasoline is highly flammable and explosive, and you can be burned or seriously injured when
refueling.
o Stop engine and keep heat, sparks, and flame away.
o
Refuel only outdoors.
o
Wipe up spills immediately.
• Use unleaded gasoline with an octane rating of 86 or higher.
• This engine is certified to operate ONLY on unleaded gasoline.
Unleaded gasoline produces fewer engine and spark plug deposits and extends exhaust system life.
Never use stale or contaminated gasoline or an oil/gasoline mixture. Avoid getting dirt or water in the
fuel tank.