User's Manual

ETERNA2 Regulatory User Guide Dust Networks 11
2. Select the serial port corresponding to the CLI interface to the network manager
3. Setup the Serial Port via the Setup -> Serial port … Menu item:
4. Create a TeraTerm macro, a text file with the extension *.ttl, with the following content:
; Tera Term macro for pinging Dust motes in a network over the managers CLI port
;
; File: ping_loop.ttl
; Description: Looping ping macro for support of Radiated Immunity testing of Dust
; Networks Radios. Set for one ping two messages every delayInMiliSeconds period,
; with 255 steps from 80 to 1000 MHz. For Radiated Immunity above 1 GHz testing is
; only intended to be performed for bands where portable radios are permitted to
; operate - this range and therefore the test duration will change over time.
timeout = 10
steps = 255
delayInMiliSeconds = 3000
sendln
for i 1 steps
sendln