User's Manual

CHAPTER 1 - M1010 EVALUATION MODULE Connector P1
2 D1100 EVALUATION KIT QUICK START GUIDE
Connector P1
Connector P1 is a 4-position terminal block connector that accepts 12-22 AWG wire. It
assumes 0 to 5 V inputs, and contains internal filter circuitry for 60 Hz noise.
cWarning: Reverse biasing these inputs may result in damage to the device.
Table 1-1.
P1 Connector Pinouts
Pin
Number
Pin Name I/O Description
1 A1 I Analog input 1 (0 - 50)
2 GND I Ground
3 A2 I Analog input 2 (0 - 50)
4 GND I Ground