User's Manual

Table Of Contents
Interfaces
M2135-1/M2030-1 MOTE DATASHEET DUST NETWORKS 21
CONFIDENTIAL
7.3.4.7 Parameter Type 0x07 Mote information
This parameter is only valid for the Get Parameter command. It is a diagnostics request that retrieves information about the
mote’s properties.
The following packet is sent in response to a request for information about mote properties.
5-8 ULong Cycle
9-12 ULong
Offset (µsec)
13-14 Frame Length (slots) UShort Frame Length
15-18 UTC Time sec ULong UTC Time sec
19-22
UTC Time µsec
ULong
UTC Time µsec
23-26 Mote uptime msec ULong Mote uptime msec
27 UChar Mote state
28 Mote diagnostics status (see
Table 36)
UChar Mote diagnostics status
Table 43 Parameter Type 0x07 Mote Information Get Request
Msg Byte Description Data Type Value
1 Cmd Type UChar 0x89
2 Parameter Type UChar 0x07
Table 44 Parameter Type 0x07 Mote Information Get Response
Msg Byte Description Data Type Value
1 Cmd Type UChar 140 (0x8A)
2 Parameter Type UChar 0x07
3 Error Code UChar Error Code
4 Data length UChar Data length (0x1F)
5-7 HW model Array of 3 UChar HW model
8-9 HW revision Array of 2 UChar HW revision
10-13 SW revision Array of 4 UChar SW revision
14-21 MAC address Array of 8 UChar MAC addr
22 Networking type UChar 2 = 2.4 GHz network
23-24 Network ID UShort Network ID
25-32 Datasheet ID Array of 8 UChar Datasheet ID
33-34 Mote ID UShort Mote ID
35 Reserved
36 Mote diagnostics status (see
Table 36)
UChar Mote diagnostics status
Table 42 Parameter Type 0x05 Time/State Get Response
Msg Byte Description Data Type Value
PRELMINARY