User's Manual
Table Of Contents
- 1.0 Absolute Maximum Ratings
- 2.0 Normal Operating Conditions
- 3.0 Electrical Specifications
- 4.0 Radio
- 5.0 Pinout
- 6.0 Mote Boot Up
- 7.0 Interfaces
- 7.1 Timestamps
- 7.2 Status
- 7.3 Serial Interface
- 7.3.1 Serial Handshake Protocol
- 7.3.2 Mote Command Data Types
- 7.3.3 Mote Commands
- 7.3.3.1 Command 0x80 Serial Payload Sent to Mote Serial
- 7.3.3.2 Command 0x81 Unacknowledged Serial Payload Received from Mote Serial
- 7.3.3.3 Command 0x82 Acknowledged Serial Payload Received from Mote Serial
- 7.3.3.4 Command 0x84 Time/State Packet
- 7.3.3.5 Commands 0x87 and 0x88 Set Parameter Request/Response
- 7.3.3.6 Commands 0x89 and 0x8A Get Parameter Request/Response
- 7.3.3.7 Command 0x8C Mote Information
- 7.3.3.8 Command 0x8D Reset Mote
- 7.3.4 Mote Get/Set Command Parameters
- 7.3.5 HDLC Packet Processing Examples
- 8.0 Packaging Description
- 9.0 Regulatory and Standards Compliance
- 10.0 Ordering Information
Radio
M2135-1/M2030-1 MOTE DATASHEET DUST NETWORKS™ 5
CONFIDENTIAL
3.1 Application Circuit
The following schematic shows how the M2135-1/M2030-1 mote is used in a circuit.
Figure 1 M2135-1/M2030-1 Mote in Application Circuit
4.0 Radio
4.1 Detailed Radio Specifications
Table 7 Radio Specifications
Parameter Min Typ Max Units Comments
Operating frequency 2.4000 2.4835 GHz
Number of channels 15
Channel separation 5 MHz
Occupied channel bandwidth 2.7 MHz At –20 dBc
Modulation IEEE 802.15.4 DSSS
Raw data rate 250 kbps
Receiver sensitivity –90 dBm At 1% PER, Vcc = 3 V,
25 °C
Output power, EIRP
M2135-1
At 25 °C +15 dBm
Vcc = 3 V, +2 dBi antenna
M2030-1
At 25 °C –2 dBm
Vcc = 3 V, +2 dBi antenna
PRELMINARY