SDS

Section 8. Exposure controls/personal protection
Use a properly fitted, air-purifying or air-fed respirator complying with an approved
standard if a risk assessment indicates this is necessary. Respirator selection must be
based on known or anticipated exposure levels, the hazards of the product and the safe
working limits of the selected respirator.
Respiratory protection
:
Other skin protection
:
Appropriate footwear and any additional skin protection measures should be selected
based on the task being performed and the risks involved and should be approved by a
specialist before handling this product.
Section 9. Physical and chemical properties
Physical state
Melting point
Vapor pressure
Relative density
Vapor density
Solubility
Liquid.
Not available.
1.26
1 [Air = 1]
0.31 kPa (2.333 mm Hg) [at 20°C]
Not available.
Not available.
Odor
pH
White.
Color
Evaporation rate
0.09 (butyl acetate = 1)
Auto-ignition temperature
Flash point
Not available.
Closed cup: >93.3°C (>199.9°F)
Not available.
9.5
Viscosity
Kinematic (room temperature): >0.205 cm
2
/s (>20.5 cSt)
Kinematic (40°C (104°F)): >0.205 cm
2
/s (>20.5 cSt)
Not available.
Odor threshold
Partition coefficient: n-
octanol/water
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
Appearance
Boiling point
:
100°C (212°F)
Flammability (solid, gas)
:
Not available.
Lower and upper explosive
(flammable) limits
:
Not available.
Decomposition temperature
:
Not available.
Heat of combustion
:
1.502 kJ/g
Aerosol product
Molecular weight
:
Not applicable.
Section 10. Stability and reactivity
Conditions to avoid
No specific data.
The product is stable.
Chemical stability
No specific data.
:
:
Incompatible materials
:
Possibility of hazardous
reactions
:
Under normal conditions of storage and use, hazardous reactions will not occur.
Reactivity
:
No specific test data related to reactivity available for this product or its ingredients.
Date of issue/Date of revision
:
3/10/2016
Date of previous issue
:
2/13/2016
Version
:
2
6/11